In-Line Lubricators & Filter / Lubricators
Additional Information
In-Line Lubricators, Filter / Lubricators, and Constant Feed Lubricators from 1.05 Fluid Ounce Capacity to 16 Fluid Ounce Capacity.
In-Line Lubricators
- Use Lubricators to save money and eliminate repairs.
- Use lubricators to eliminate costly downtime.
- All airtools need lubrication.
- Absolute must for improved tool life.
- Metering valve for adjusting oil flow.
- Repair kits available.
- Sight disk in housing to visually inspect oil level.
See Our In-Line Lubricators & Filter / Lubricators Products »
These are heavy-duty in-line lubricators to be installed 6-8 feet from the tool. Designed for use with tools being used too far away from compressor to be lubricated by a permanently mounted unit.
These lubricators can be used on everything from an air scribe to a paving breaker.
Pressure Relief Caps and Constant Feed models available. Nickel Plated lubricators are suitable for underground mine operations. All lubricators can be purchased with optional British Standard Threads for no additional charge.
In-Line Filter / Lubricators
- Filter housing is an integral unit.
- Uses a 40 micron sintered bronze particulate filter.
- Reduces downtime.
- Prevents costly repairs.
- Extends air tool life.
- Casting design prevents breakage where a pipe nipple was used to connect filter to lubricator.
- Adjustable metering valve.
- Sight disk in housing to visually inspect oil level.
These filter / lubricators can be used on:
Pneumatic Hammers
Impact Wrenches
Nut Runners
Grinders
Air Screw Drivers
One of the most common repairs an air tool undergoes is disassembly to clean foreign material out of the valve assembly. In-line Filter / Lubricators help prevent this from happening. The 40 micron filter can easily be cleaned or replaced.
In-Line Lubricators & Filter / Lubricators
Additional Information
In-Line Lubricators, Filter / Lubricators, and Constant Feed Lubricators from 1.05 Fluid Ounce Capacity to 16 Fluid Ounce Capacity.
In-Line Lubricators
- Use Lubricators to save money and eliminate repairs.
- Use lubricators to eliminate costly downtime.
- All airtools need lubrication.
- Absolute must for improved tool life.
- Metering valve for adjusting oil flow.
- Repair kits available.
- Sight disk in housing to visually inspect oil level.
See Our In-Line Lubricators & Filter / Lubricators Products »
These are heavy-duty in-line lubricators to be installed 6-8 feet from the tool. Designed for use with tools being used too far away from compressor to be lubricated by a permanently mounted unit.
These lubricators can be used on everything from an air scribe to a paving breaker.
Pressure Relief Caps and Constant Feed models available. Nickel Plated lubricators are suitable for underground mine operations. All lubricators can be purchased with optional British Standard Threads for no additional charge.
In-Line Filter / Lubricators
- Filter housing is an integral unit.
- Uses a 40 micron sintered bronze particulate filter.
- Reduces downtime.
- Prevents costly repairs.
- Extends air tool life.
- Casting design prevents breakage where a pipe nipple was used to connect filter to lubricator.
- Adjustable metering valve.
- Sight disk in housing to visually inspect oil level.
These filter / lubricators can be used on:
Pneumatic Hammers
Impact Wrenches
Nut Runners
Grinders
Air Screw Drivers
One of the most common repairs an air tool undergoes is disassembly to clean foreign material out of the valve assembly. In-line Filter / Lubricators help prevent this from happening. The 40 micron filter can easily be cleaned or replaced.
Products List
Showing all 17 results
-
TX-1/4L
In-Line Lubricator (1/4" NPT)$44.50 -
TX-0L
In-Line Lubricator (1/2" NPT)$60.00 -
TX-0L-PR
TX-0L w/ Pressure Relief Cap$67.35 -
TX-0L-F
In-Line Filter-Lubricator (1/2" NPT)$82.65 -
TX-0L-F-PR
TX-0L-F w/ Pressure Relief Cap$90.00 -
TX-0L-F-NP
Nickel Plated In-Line Filter-Lubricator (1/2" NPT)$124.95 -
TX-1L
In-Line Lubricator (3/4" NPT)$67.50 -
TX-1L-PR
TX-1L w/ Pressure Relief Cap$74.85 -
TX-1L-F
In-Line Filter-Lubricator (3/4" NPT)$90.45 -
TX-1L-F-PR
TX-1L-F w/ Pressure Relief Cap$97.80 -
TX-2L
In-Line Lubricator (3/4" NPT)$80.70 -
TX-2L-PR
TX-2L w/ Pressure Relief Cap$88.60 -
TX-2L-F
In-Line Filter-Lubricator (3/4" NPT)$103.85 -
TX-2L-CF
TX-2L Lubricator (3/4" NPT) w/ Constant Feed$103.30 -
TX-3L
In-Line Lubricator (1" NPT)$93.75 -
TX-3L-PR
TX-3L w/ Pressure Relief Cap$101.10 -
TX-3L-CF
TX-3L Lubricator (1" NPT) w/ Constant Feed$116.35