Texas Pneumatic Tool Schematics
Schematics for all tools manufactured by Texas Pneumatic are located within this category.
Products List
Showing all 40 results
-
TX-6AMF
TX-6AMF Tank Style Manifold -
TX-PL5500
Pneu-Light, Compressed air powered LED light. -
TX-DCS2
TX-DCS2 Dust Collection System 2" -
TX-DCS3
TX-DCS3 Dust Collection System (3") w/ Cart -
TX-DCS-MU3
TX-DCS-MU3 Dust Collection System (3 Way) -
TX-DCS-MU5
TX-DCS-MU5 Dust Collection System (5 Way) w/ Cart -
TX-JF20 & TX-JF24
Jet Fans - 20" & 24" -
TX-SG20 & TX-SG24
Swing Gates - 20" & 24" -
TXAS1
Air Scribe -
TX1B-LTNS & TX1B-LTCS
Needle / Chisel Scaler (Cleco Style) -
NEEDLE / CHISEL SCALERS
TX456 NEEDLE / CHISEL SCALERS -
TX182-NS & TX182-CS
Needle / Chisel Scaler (IR Style) -
TX456-NS & TX456-CS
Needle / Chisel Scaler (CP Style) -
TX1000TSL
Tomato Stake Driver -
TX456-TS & TX456-TS-FT
TX456 Tomato Stake Tool -
TX2LRCS
Long Reach Chisel Scaler -
S1 & T3
Piston Scalers -
TX-2AMF
TX-2AMF - 15 Gal., 200 PSI w.p., A.S.M.E. Certified Air Manifold -
TX-1AMF
Cast Aluminum Air Manifold w/ Wagon Wheel Safety Cage -
TX-1AMF-WF
Cast Aluminum Air Manifold w/ Water Filter & Wagon Wheel Safety Cage -
1291-TPT2
Delux Quick Change Retainer for 4-Bolt Chipping Hammers -
TX-20104, TX-20108 & TX-20112
4", 8" & 12" Scraper Blades for Long Reach Scaler -
TX-CH2, TX-CH3 & TX-CH4
Goose Neck Chipping Hammers -
TX-CH2-4B, TX-CH3-4B & TX-CH4-4B
4-Bolt Chipping Hammers -
TX-133-8RB, TX-133-6RB & TX-133-11RB
Inside & Outside Trigger Rivet Busters (6", 8" & 11" Stroke) -
TX-00
Sand Rammer -
TX-7OB
Sand Rammer -
TX-8/2-½” & TX-8-4”
Bench Rammers -
TX-6TN
Backfill Tamper -
TX30CD-1 & TX30CD-8
30 lb. Clay Diggers w/ 7/8" x 3-1/4" or 1" x 4-1/4" Bushings -
TX30PB-1 & TX30PB-8
30 lb. Paving Breakers w/ 7/8" x 3-1/4" or 1" x 4-1/4" Bushings -
TX40PB-E
40 lb. Paving Breaker w/ 1" x 4-1/4" Bushing -
TX60PB-4 & TX60PB-8
60 lb. Paving Breakers w/ 1-1/8" x 6" or 1-1/4" x 6" Bushings -
TX90PB-4 & TX90PB-8
90 lb. Paving Breakers w/ 1-1/8" x 6" or 1-1/4" x 6" Bushings -
TX-C9
Texas Pneumatic Tools - TX-C9 Utility Hammer Drill -
TX-18D
18 lb. Drill w/ 7/8" x 3-1/4" Bushing -
TX-29RD-8/3 & TX-29RD-8/4
29 lb. Rock Drills w/ 7/8" x 3-1/4" or 7/8" x 4-1/4" Bushings -
TX-30RD-8/3 & TX-30RD-8/4
30 lb. Rock Drills w/ 7/8" x 3-1/4" or 7/8" x 4-1/4" Bushings -
TX60RD-1, TX60RD-8 & TX60RD-8-3
60 lb. Rock Drills w/ 7/8" x 3-1/4", 7/8" x 4-1/4" or 1" x 4-1/4" Bushings -
VAM3, VAM6, VAM8 & VAM10
3", 6", 8" & 10" Air Misters & Air Mover Stand (AMIS30)
