Hydraulic (2,000 PSI) Hose Whip Assemblies
Hydraulic (2,000 PSI) hose whips can be made from 1/2″ and 3/4″ ID hoses. Typically, 1/2″ ID hose is used, but any combination is possible. Hydraulic hose whip assemblies are only made using ferrules to crimp the hose on the fittings or hose ends.
Hose Guard Springs are not available for hydraulic hose whips.
Hydraulic (2,000 PSI) Hose Whip Assemblies
Hydraulic (2,000 PSI) hose whips can be made from 1/2" and 3/4" ID hoses. Typically, 1/2" ID hose is used, but any combination is possible. Hydraulic hose whip assemblies are only made using ferrules to crimp the hose on the fittings or hose ends.
Hose Guard Springs are not available for hydraulic hose whips.
Products List
Showing all 10 results
-
TX-1HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 1/4" MPT Hose End$123.60 -
TX-2HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 3/8" MPT Hose End$123.60 -
TX-3HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 1/2" MPT Swivel (Straight)$123.60 -
TX-3HW-3/4-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 3/4" MPT Hose End$123.60 -
TX-4HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 7/8"- 24 Thread Bent Swivel (TX-01087)$148.15 -
TX-4HW-1/2-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-0L & 1/2" MPT Bent Swivel (TX-00988)$148.15 -
TX-5HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-1L & 3/8" MPT Hose End$136.00 -
TX-6HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-1L & 1/2" MPT Swivel (Straight)$136.00 -
TX-9HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-1L & Crow Foot Hose End$136.00 -
TX-11HW-HYD
1/2" ID x 6' - 2,000 PSI (Hydraulic) HWA w/ TX-2L & 1/2" MPT Swivel (Straight)$154.35
